| EK1H-E014C/013C | ||
| Client Item No. | Description | USD (Wholesale) |
| EK1-0348 | 螺距规（量角仪） Screw-pitch gauge | 5.8 |
| EK1-0500 | Balance trust bearing 3*8*3.5mm 平衡推力轴承 3*8*3.5mm | 1.8 |
| EK1-0501 | Plastic tail blade (white)塑胶尾旋翼(白色) | 1.5 |
| EK1-0502 | Plastic tail blade (yellow)塑胶尾旋翼(黄色) | 1.5 |
| EK1-0503 | Belt 皮带 | 3.8 |
| EK1-0504 | Main blade sustain set 主翼支撑架 | 1.8 |
| EK1-0505 | Landing skid mat 脚架垫 | 1.6 |
| EK1-0506 | Bearing 2*5*2.5mm 轴承2*5*2.5mm | 2.8 |
| EK1-0507 | Bearing 20*27*4mm 轴承20*27*4mm | 2.5 |
| EK1-0508 | Bearing 2*6*3mm 轴承2*6*3mm | 3.3 |
| EK1-0509 | Bearing 3*6*2.5mm 轴承3*6*2.5mm | 3.3 |
| EK1-0510 | Oneway bearing 单向轴承 | 3.3 |
| EK1-0511 | Plastic paddle (white) 塑胶平衡翼(白色) | 1.8 |
| EK1-0512 | 塑胶平衡翼(黄色) Carbon fibre paddle(yellow) | 1.8 |
| EK1-0513 | Canopy set (yellow) 机头罩组(黄色) | 4.8 |
| EK1-0514 | Canopy set (white) 机头罩组(白色) | 4.8 |
| EK1-0515 | Main blade clamp set 主旋翼夹头组 | 3.8 |
| EK1-0516 | Bell control arm set 贝尔控制臂组 | 4.5 |
| EK1-0517 | Main Blade Housing 主旋翼固定座组 | 3.6 |
| EK1-0518 | Flybar case set 平稳翼中心座组 | 3.8 |
| EK1-0519 | Flybar Paddle controling set 平稳翼控制组 | 2.9 |
| EK1-0520 | Control arm set 希拉控制臂组 | 4.9 |
| EK1-0521 | Controlling shaft set 控制杆组 | 1.5 |
| EK1-0522 | Swashplate set 倾斜盘组 | 3.6 |
| EK1-0523 | Main Frame set 机身组 | 3.6 |
| EK1-0524 | 1.9 | |
| EK1-0525 | Swashplate guide plate 倾斜盘导板 | 1.5 |
| EK1-0526 | Elevator Controlling set 升降控制组 | 2.3 |
| EK1-0527 | L&R Controlling Arm Set 左右控制摇臂组 | 2.3 |
| EK1-0528 | Tail driven set 尾传动座组 | 2.3 |
| EK1-0529 | Tail blade controlling set 尾旋翼控制组 | 3.3 |
| EK1-0530 | Outdoor first aid accessory 户外急救零件包 | 5.5 |
| EK1-0531 | Screws standby 螺丝备用包 | 3.3 |
| EK1-0532 | 马达固定座组 Motor Mount set | 3.3 |
| EK1-0533 | 尾舵控制连杆组 Tail servo control push-rod set | 3.3 |
| EK1-0534 | 主齿轮组 Main gear set | 5.8 |
| EK1-0535 | 尾管组 Tail boom set | 4.8 |
| EK1-0536 | 平衡杆 Flybar | 3.3 |
| EK1-0537 | 尾翼夹头组 Tail blade clamp set | 3.8 |
| EK1-0538 | 主轴组 Main shaft set | 3.8 |
| EK1-0539 | 主齿轮 Main gear | 3.8 |
| EK1-0540 | 横轴 Feathering shaft | 3.3 |
| EK1-0541 | 尾管支撑架组 Tail driven pedestal set | 3.3 |
| EK1-0542 | 尾翼主轴组 Tail blade main shaft set | 3.3 |
| EK1-0543 | 脚架组 Landing skid set | 4.8 |
| EK1-0544 | 尾传动轮组 Tail driven gear set | 3.8 |
| EK1-0545 | 垂直水平尾翼组(白色) Vertical & horizontal tail blade set (white) | 3.8 |
| EK1-0546 | 垂直水平尾翼组(黄色) Vertical & horizontal tail blade set (yellow) | 3.8 |
| EK1-0547 | 连杆 Linkage Rod | 4.8 |
| EK1-0548 | 伺服器连杆 Servo Linkage Rod | 3.3 |
| EK1-0549 | 轴承5*8*2.5mm Bearing 5*8*2.5mm | 3.3 |
| EK1-0550 | 轴承5*10*3mm Bearing 5*10*3mm | 3.3 |
| EK1-0551 | 轴承4*7*2.5mm Bearing 4*7*2.5mm | 2.8 |
| EK1-0552 | 塑胶升级组 Plastic Upgrade Set | 8.7 |
| EK1-0553 | 螺丝连杆组 Screw Push-rod Set | 1.8 |
| EK1-0554 | 碳纤机身组 (升级件) Carbon Fibre Main Frame set(upgrade ) | |
| EK4-0009 | 木制主旋翼 315*32.5*4.5MM Wooden main blade | 5.6 |
| EK4-0015 | 碳纤主旋翼 315*32.5*4.5MM Carbon fibre main blade | 28 |
| EK4-0058 | Glass Fiber Reinforced Plastic Canopy set (玻璃钢机头罩组 ) | 8.6 |
| EK4-0150 | Carbon fibre tail blade 碳纤尾旋翼 | 7.8 |
| EK4-0151 | Carbon fibre paddle 碳纤平横翼 | 7.8 |
| EK4-0153 | Carbon fibre tail boom 11*12*352mm 碳纤尾管11*12*352mm | 8.8 |
| EK4-0154 | Vertical Tail Blade( Carbon Fibre) 118*69*1mm 垂直尾翼(碳纤) 118*69*1mm | 5.6 |
| EK4-0155 | Horizontal Tail Blade( Carbon Fibre) 90*49*1mm 水平尾翼(碳纤) 90*49*1mm | 4.6 |
| EK4-0156 | Upper & Left Frame 195*61.5*1mm 左上侧板195*61.5*1mm | 8 |
| EK4-0157 | 6008右上侧板195*61.5*1mm | 8 |
| EK4-0158 | 6008左下侧板183*59*1mm | 8 |
| EK4-0159 | 6008右下侧板183*59*1mm | 8 |
| EK4-0160 | 6008底板100*38*1mm | 5.8 |