SHEN ZHEN FLYING PUSH ELECTRON CO., LTD.中国.深圳飞扬波特电子有限公司

欢迎光临飞扬模型Planemodel.com

[ 中文 ] [ ENGLISH ]

联系我们

QQ在线客服

点击下面客服人员名单，即时交流。

发邮件给我们

标题:

内容:

返回列表

Esky 4通道遥控器的左右手改造

时间: 2007-04-06 19:58:05

1. Change Mode 2 (throttle left hand) to Mode 1 (throttle right hand) for the transmitter from Esky-4ch Series (By contraries Mode 2 to Mode 1):

2. Open the back cover:

3.Take off the part:

4.Take off the antenna:

5. ...

6. Take off the spring piece:

7. Take off the plastic patch with a spring:

8.Left part is the plastic patch with a spring,right one is a spring piece:

9. Instasll the spring piece here:

10. Install the plastic patch with a spring here:

11. Install the plastic pacth with spring to right side place:

12. Link the screw and spring together:

13. ...

15. ...

16. ...

17. Take off the 2 BNC connector jacks by solder of a electric iron:

18. Take off 1st and 2nd BNC connector plugs:

19. Exchange 1st and 2nd BNC connector plugs

20. Solder them to the PCB:

21. Be careful of the solders points,don't become short circuit:

22. ...

23. ...

24. That is the Mode 1:

25. The end.

|<< FMS模拟软件下载

原来有线控制的UFO改造成了无线遥控的U.. >>|

统计: