welcome to Planemodel.com  
ESKY HelicopterWalkera Helic..ALIGN Helicop..Fixed-wing Ai..GFLYEsky Helicopt..Smartech CarsHSP CarsBoatsOther
[ 中文 ]     [ ENGLISH ]                               
Home
Products
Technical
News
Member Center
Message
Company
Contact Us
CONTACT US
 
MSN
Click on customer service number, real-time exchange.
SEND EMAIL TO US
Title:

Content:

Back to List
How to exchange the Mode 2 (Throttle left hand) to Mode 1 (Throttle right hand) of Esky 4ch Transmitter? The transmitter is used the Lama3 ect.
Time: 2007-4-6 19:58:05 

 

1. Change Mode 2 (throttle left hand) to Mode 1 (throttle right hand) for the transmitter from Esky-4ch Series (By contraries Mode 2 to Mode 1):
2. Open the back cover:
3.Take off the part: 
4.Take off the antenna:
5. ...
6. Take off the spring piece:
7.  Take off the plastic patch with a spring:
8.Left part is the  plastic patch with a spring,right one is a spring piece:
9. Instasll the spring piece here: 
10. Install the plastic patch with a spring here: 
11. Install the plastic pacth with spring to right side place:
12. Link the screw and spring together:
13. ...
15. ...
16. ...
17. Take off the 2 BNC connector jacks by solder of a electric iron:
18.  Take off 1st and 2nd BNC connector plugs:
19. Exchange 1st and 2nd BNC connector plugs 
20. Solder them to the PCB:
21. Be careful of the solders points,don't become short circuit:
22. ...
23. ...
24. That is the Mode 1:
25. The end.

 |<< FMS download Maybe you can change.. >>| 
Home Products Technical News Member Center Message Company Contact Us My Cart My Orders
Copyright © 2004 Shenzhen Flying Push Electron Inc. All Rights Reserved
中国深圳飞扬波特电子有限公司版权所有 粤ICP备08014058号 网站建设:百度飞扬 		sta.