Instructions:

Flier-450SE RTF helicopter, main rotor head, tail rotor system upgrades improved the first pieces of metal, high-strength carbon fiber frame design, carbon fiber 325 mm main blades, the Three point main shaft bearing support sets,three main support housings, easy to install targeted ccpm steering gear metal fixation, the main upward to install the battery and motor support and center of gravity makes cooling more reasonable. Most of the spare parts and components market and the mainstream 450 helicopters.- New 1.2mm CNC carbonfiber main frames only 1.2mm, improve the rigidity and perfect for 3D flying.
- Changing servo location to CCPM version, new aluminum parts for prompt, precision actions.
- The fiberglass battery mounting plate connects to main frame. It makes the center of gravity closed to rotor blade, reduced the correction when the heli rotation rolling.
- Rigid CNC aluminum rotor head for precision and smooth movements.
- Using Ball and Hiller two systems mixing control. Through simple structure of Ball control system, power-saving of Hiller system and CCPM control, can simultaneously control 3 servo for AILE, EVLE, PIT 3 actions. This CCPM control system is great for 3D flying control and extending life cycle of servos.
- New streamlined carbon tail rotor blades makes the gyro more efficient.
- New tail rotor control set, CNC control piece and movable ball link for smooth pitch travel.
- Providing flybar weight- When normal flying, you can add the weights on flybar paddles for stable flight. When aerobatic flying, you don’t need to add the weight, but you can see the flexibility of 3D actions.
- CNC Metal tail unit and tail holder are using high rigid aluminum, falling resistance.- New gear ratio(4.24:1), suitable for the motor with higher KV, provide more safty.
- Use Aluminum alloy drive pulley and tail drive pulley, high regid and wear resistance. It is efficient to reduce the rotation loss and makes more smooth.
- All kit use stainless steel linkage ball, wear resistance, anti-oxidization.
- Tail rotor hub made of stainless steel, very rigid.
- Great stable and sensitive mixing lever design! Can disply the great stability and precision for 3D flight.
- Special adjustable pitch system, hold rotation system, tail rotor drive belt system! It is a work of great originality for helicopter!

- Shenzhen FS-CT6A 2.4GHz 6ch USB Programmable
RC System or FT06-C 35Mhz/72Mhz 6ch RC System are more mature experienced a test of the six-channel remote control.

- FS-CT6A is programmable by USB to communicate with a computer.esasy to setup and adjust flight parameters by computer. 

- FT06-C is with mixed CCPM helicopter specialized control functions, panel above The potential for small switches and knobs, 3D helicopter for all the standard settings: plus or minus pitch range (PLT), pitch zero point (PZT), elevator, aileron size of the rudder (the upper right A: H: switch), gyro Instrument sensitivity (potential top left), the throttle V-curve (the upper left potential), and so on. It showed a good cost performance, very popular among the majority of enthusiasts and beginners welcome!

- After careful tuning of the electronic JB08 gyroscope, making the plane with a considerable 3 D flight capability, verification of the end of the lock basic ways to use this flight test: positive or anti-hours of the retreat route is the most Gyroscope for the assessment of the ability of the end Suo, this helicopter in this test of the good performance!

Specification:

- Length:650mm(25.6 in)
- Height:230mm(9.1 in)
- Main Blade Length:325mm
- Main Rotor Diameter:700mm(27.6 in)
- Tail Rotor Diameter:150mm(5.9 in)
- Motor Pinion Gear:12T/13T
- Main Drive Gear:150T
- Autorotation Tail Drive Gear:106T
- Tail Drive Gear:25T
- Drive Gear Ratio:1:12.5:4.24/1:11.5:4.24
- Weight:440g
- Flying Weight:Approx 730g
- Colour carton:68cm*17.5cm*21cm/1set
- Outer carton:

43.5cm*68.5cm*18.5cm

/ctn,2sets/ctn,7.0kg/ctn

Features:

- CNC high strength carbon fiber main frames

- 30 Precision Bearings
- Auto-Rotation System
- Rear Tail Servo Mount
- Collective Pitch System
- Tail Rotor Drive Belt System
- Three point main shaft bearing support sets
- RC:FS-CT6A 2.4GHz 
6ch USB Programmable
RC System or FT06-C
35Mhz/72Mhz 6ch RC
System
- JB08 lock tail gyro

RTF accessories included :

1) Flier-450SE CF set*1 set
2) 325 CF rotor blade*1 set
3) Canopy*1 blue 
4) RC:FS-CT6A 2.4GHz 
6ch USB Programmable
RC System or FT06-C
35Mhz/72Mhz 6ch RC
System
5) Gyro: Lock head gyro*1
6) Servo:PM-09*3
7) Rud servo:PM-09*1
8) Brushless motor:PM3600KV*1
9) Battery:3E-10.1v2200mAh20C*1
11) Charger:Belence charger*1
12) Adaptor:*1
13) ESC：PM-30A*1
14) Colour carton:68cm*17.5cm*21cm/1set,3kg/1set
15) Outer carton:43.5
cm*68.5cm*18.5cm/ctn,
2sets/ctn,7.0kg/ctn