Li-Poly/Li-Fe Battery Balancer

Balancer screen and key position drawing

Product instruction:

The balancer /discharger is designed for Li-polymer and Li-fe battery ,it can measure 

battery voltage precisely and balance cell voltage in battery pack,or dischargering 

battery for long time storage.

The balancer function can be executed before /after battery chargerd .It also can be 

done during battery charging process.It makes sure battery pack keeping in excellent 

condition.

User could observe all cell voltage in whole battery pack at once .It helps user to find

  out which cell is abnormal during charging or discharging process.

Due to li-polymer &Li-fe battery are high energy density and high discharge ability storage,

using this equipment,you must be patient to studt this instruction to keep from wrong 

operartion or setting making battery damaged or other danger.

Balance/Discharge voltage setting mothod:

1.Under standard mode ,Push mode key to start setting mode.

2.First setting balance the lowest permitted voltage ,battery must above the voltage ,so it

  can execute balance function.

3.While discharging the permitted lowest voltage generally be setted  to battery stored voltage,

the voltage value .pleasr

please inqury battery battery supplier .Pre-setting is 3.9V (in only fit for general Li-polymer 

battery,about Li-fe battery ,about Li-fe battery please inquiry battery supplier.)

4.Return to standard mode.

Product specification:

Outline Dimension:                    93.5*60*17mm

Measureable battery type and amout :li-polymer/Li-fe 2-6 Cell(standard voltage 7.4V-22.2V using

                                    divided voltage connector)

Receiver battery:                   1.2v-8.5V DC(Not limit battery type ,but need external power 

                                    7.4V-11.1v ,use JST connector)

Balance voltage setting range(lower limit):  2.0V-4.2V (pre-setting value 3.3v)

Discharge voltage setting range(lower limit ):2.0V-4.2V (Pre-setting value 3.9V)