External BEC 5.2V／6.0V﹣5A

1. Why do we use EBEC?
1.1. The present model of digital remote servo is becoming increasingly popular, and it is characterized by rapidness and accuracy. However, the price is enormous consumption of power. The general electronic regulator has built-in BEC functions, but it can only provide the load current at most 2 A. The level of below 450 remote control model helicopter is already the limit. If used on high-performance tail locked machine, when performing a 3 D action, the machine often doesn’t perform appropriately, even sometimes goes out of control because of the main electric motor consumes much electricity,  power battery supply meets instant shortage. EBEC is a kind of external power regulator device, which can continue to provide stability as much as 5 A of output current. It is easy to supply power to receivers, gyroscopes, four more than the standard size of the digital power servo.

1.2.  Nowadays 3 D is very popular among the model industry, and most players like to use the powerful 6 V digital servo. If we use 5 cell nickel-hydrogen batteries, electricity can reach 7 V in a post-voltage, it may burn gyroscopes and the standard voltage 4.8 V The tail locked machine. EBEC is an external power supply voltage regulator devices, which can provide 6 V voltage               accurately. 3 D allows players to enjoy the fun and protection from the safe equipment.

1.3. To reduce the weight of power supply system, and enhance the dynamic model indirectly. JR4N1100Ni-Cd batteries, 4.8 V, 1100mAh, 120g, EBEC with 1500 mAh lithium batteries, 5.2 V, 1500mAh, 75g, can reduce 45 grams. If 6 V is needed, then, Ni-Cd batteries with 150 g, still 75 g EBEC, can reduce 75 grams. The weight-sensitive remote control helicopter is very impressive.

2. Specifications:
2.1. Output: 5.2V/5A or 6 V/5A (via switch patchbay cap)
2.2. Enter: 5.5V-12.6V (2-3 string of lithium batteries)
2.3. With 3 cell of electricity displaying
2.4. Dimensions: 57mm * 21mm * 7.0mm (Length * Width * Depth)
2.5. Weight: 13.5g (with input and output Line)

3. Characteristics:
3.1. EBEC is a linear direct current regulating system, it provides current as battery. There is no high-frequency interference in switch power, and it is especially applied for the remote control with sensitive equipment to interference..
3.2. Not specifically set up to protect and maintain the receiver will not be off in case it lost control.
3.3. Have a very small volume and very light weight with 3 cell display. It is easily to check battery status and ensure security.
3.4. It can be applied with any brushless electricity and needn’t to transfer any changes.

4. Usage：
4.1  Usage of typical EBEC

4.2  Typical 3 D settings, usage of the wiring diagram of 6 V digital servo.

4.3  The usage of 4.3 and electric models, and the choice and setting of  receiver output voltage please refer to 4.1,4.2.